Transport Incubator

Transport Incubator

Product Details:


Product Description

Transport Incubator

Control Panel

The controller features a display that is easy to read at any angle during transport. Display for air and skin temperature help you maintain, control and provide essential information about the infants thermal support. Microprocessor controlled system with air and skin modes of operation. Display both temperatures i. e. Air/Skin temp along with Set temp. Soft touch operation with digital display and extensive alarms.

Collapsible Stainless Steel Stand

With 2/4 no. gas springs for ambulance and in hospital transport purposes. Gas spring system allow the stand to collapse when the lever is pulled and trolley is pressed from both the sides.

Easy  Access

Quick and easy access through the side access door and front port holes. The side door folds down and the matteress retracts out  from the hood to access for emergency procedures. The door and tubing ports  offer ventilator tubing support .Infant restraint strap attached to the baby bed.

Power Source

  • Transport incubator operates on AC or DC power using AC when
  • available or switching to its internal battery when necessary
  • Battery : The batteries used in the system are 12 volt 18ah.
  • Sealed maintenance free VRLA batteries.
  • Charge Time : 8-10 hrs. per battery from full discharge.
  • Hood options : Standard single wall / double wall hood (on demand).
  • Chassis Body : Plastic (fibre) to shock proof the system

Standard Features

  • Single wall Hood
  • Skin temperature probe / Air temp. Probe
  • 2 access doors
  • 1 baby belt
  • Collapsible trolley


  • Examination lamp
  • 2 disposable infant restraint straps
  • 1 iris port
  • 6 tubing ports
  • Accessory shelf
  • Suction, Oxygen cylinder, pressure regulatory assembly, Flow Meter, Remote Controlled movement of the Trolley.


  • Skin temp  low / high
  • Probe failure
  • Low battery
  • Power failure
  • System Failure
  • Timer

In case of high temperature i.e. above 380C, heater automatically cuts off thus ensuring baby safety. Can be used on manual mode as well.0 C- 390 C

Temp variability

1.00 C

Temp uniformity

1.00 C

Air Filter

Remove airborne particle and dust

Control Display

Battery Condition status

Single led Indication of low bettery condition on the side panel

Power mode

Illuminates AC, DC or external DC

Air/Baby temp 0C

Displays incubator air temp / baby temperature

Imensions in Inches (Approx.)

Height without hood


In collapsible stand mode


Height with hood






Baby Bed






Size of Castors

5" PU

Sealed maintenance free batter

VRLA Batteries Charge time : 10hrs.(Approx.)

Enter Buying Requirement Details
Email Id
Mobile number

Back to top
MEDKM HEALTHCARE All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Private Limited.